Indian Science Technology and Engineering facilities Map
 
Supplier Map
Service Map

Publications

Publication Details

Applicant:
Indian Institute of Technology (IIT) Patna 
Author:
Raychoudhury, T. and Surasani, V.K. 
Corresponding Authors:
Raychoudhury, T.  
DOI #:
https://doi.org/10.1007/s12040-017-0836-9 
Title:
Implication of saturated porous media surface modified NZVI particle retention in the porous media: assessment with the help of 1-D transport model 
Journal:
Journal of Earth System Science 
Year:
2017 
Volume:
126 
Page:
Keywords:
Nanoparticles, porosity, transport, straining, deposition, flow condition 
Abstract:
Retention of surface-modified nanoscale zero-valent iron (NZVI) particles in the porous media near the point of injection has been reported in the recent studies. Retention of excess particles in porous media can alter the media properties. The main objectives of this study are, therefore, to evaluate the effect of particle retention on the porous media properties and its implication on further NZVI particle transport under different flow conditions. To achieve the objectives, a one-dimensional transport model is developed by considering particle deposition, detachment, and straining mechanisms along with the effect of changes in porosity resulting from retention of NZVI particles. Two different flow conditions are considered for simulations. The first is a constant Darcy’s flow rate condition, which assumes a change in porosity, causes a change in pore water velocity and the second, is a constant head condition, which assumes the change in porosity, influence the permeability and hydraulic conductivity (thus Darcy’s flow rate). Overall a rapid decrease in porosity was observed as a result of high particle retention near the injection points resulting in a spatial distribution of deposition rate coefficient. In the case of constant head condition, the spatial distribution of Darcy’s velocities is predicted due to variation in porosity and hydraulic conductivity. The simulation results are compared with the data reported from the field studies; which suggests straining is likely to happen in the real field condition. 
Entered by:
Physics Head on 2020-08-03 
 
THE VISION
THE MISSION
ABOUT I-STEM
It has always been the basic tenet of the Government of India, in generously funding R&D efforts at academic institutions over the years, that facilities established through such support be made available to those needing them and qualified to make use of them for their own research work
read more >>

However, this was never easy or straightforward for, among other reasons, there was no ready source of information of what facility was available and where. Thanks to the Web, it is much easier today to have a national and regional “inventory of resources”, so as to match users with the resources they need, and to do all this in an efficient and transparent manner.

This can lead to a leap in R&D productivity and greatly enhance the effectiveness of public investment. This is the motivation behind I-STEM.
read less <<
Visitor Hit Counter
Hosted at Indian Institute of Science
Copyright © 2024 I-STEM. All rights reserved.
Audited by: STQC Bengaluru.