Indian Science Technology and Engineering facilities Map
 
Supplier Map
Service Map
Preivious Next  

  Digital Catalogue for Technology and Products Development


   Technology and Product Development

    Basic Information

Technology developed: Automatic Dispenser for Border Molding in Complete Denture Prosthesis (TP19766683685)
Category: Product(Hardware/Material/Software)
Details of Inventor(s):
Inventor Institution/Organization/Company Department Designation
Dr.Sivaranjani Gali Ramaiah University of Applied Sciences, Bengaluru Prosthodontics, FDS, RUAS Reader
Mr. Nagaraja B Ramaiah University of Applied Sciences, Bengaluru TechnoCentre Engineering Technical Manager
Dr Niranjana Prabhu Ramaiah University of Applied Sciences, Bengaluru Professor and HOD
Dr Shwetha Venkataramana Ramaiah University of Applied Sciences, Bengaluru Oral Medicine and Radiology FDS RUAS Associate Professor
Dr Pramila Kalra Ramaiah Medical College, Bengaluru Department of Endocrinology Professor and HOD
Dr Vanitha Sukesh Ramaiah Medical College, Bengaluru Department of Biochemistry Professor and HOD
Technical Application Area: Healthcare
If 'Other', please specify:
Please give more details of new technical application area:
Border molding is one of the significant steps in the discipline of prosthodontics and impression procedure used to adapt a thermoplastic material closely to the tissues of the patient’s vestibule The borders of an impression tray are typically shaped by manual manipulation of tissues contours of the impression and determine size of the functional vestibule in the prosthesis. Conventionally, border molding uses a thermoplastic compound along the interior border of the impression tray. It is softened under a mild flame above its fusion temperature using a Bunsen burner. The modeling compound that softens when heated and hardens when cooled with no chemical reaction involved in its setting mechanism.. Once the border molding is completed, a tray has to be prepared before making a definitive impression. Further, a space is also created for definitive impression material and thickness of the border may be adjusted by trimming it with a conventional medical device According to the present disclosure, an automatic dispenser with an enclosure to hold a modeling compound between a narrow nozzle and a lead screw, an electric motor, with a motor shaft coupled to the lead screw passing through the enclosure and a heater to generate heat in the device for softening the modeling compound stick. The lead screw is driven forward and backward within the enclosure by operating the motor shaft in such a way that the forward motion of the lead screw pushes the softened modeled compound stick at constant flow rate.
Organization(s):
M S Ramaiah University of Applied Sciences Bengaluru
Affiliated Ministry: Institution Funding (Self Supported)
Type of technology development: Indigenous
Does the technology help in replacing any import items currently
procured from outside India?
Yes
Does the technology have export potential? Yes
Category of Technology developed: Futuristic
Stage of Development: Prototype Level
Please describe in detail including the TRL Level:
Technology Readiness Levels are a type of measurement system used to assess the maturity level of a particular technology TRL 1 Scientific research Feasibility study Prior art search Early Risk Assessment TRL 2 Early concept selection Prototype analysis Initiate design TRL 3 Completed analytical and laboratory studies Component identification/selection process Completed proof of concept model POC TRL 4 Design and simulation process completed Procurement of components TRL 5 Bread board testing completed System level testing TRL 6 Development of fully functional prototype Documentation: report generation TRL 7 Demonstration of Technology Working prototype ready TRL 8 Pending TRL 9 Pending

    Abstract:

Applications: Since the device is portable one with rechargeable battery feature, the device can be used in rural camps. The device can also be used as a putty extruder in orthodontic extrusion TP19766683685-app.pdf
Advantages: An Automatic Dispenser is fabricated for an automatic, thorough heating of the compound. This device can apply the stick compound with suitable viscosity for border molding This ensure a uniform heating of the green stick compound and a uniform layer across the borders of custom trays. It is easy to apply an even 2-to 3-mm thickness of modeling compound on the buccal or lingual flange area of the custom tray at once. The hot water bath is not needed for tempering because the device does not use direct flame, lengthening the working time. The border molding technique with this device saves time and equipment and is easy to learn. Indian Healthcare market is undergoing changes and patient centric approach is the core of all new development With the current focus on patient care the demand for shorter chair side time and minimum discomfort to patient lead to the invention of Automatic Dispenser for Border Molding Material This device will make the dentistry simpler for the denture cases and also the new generation of dentist will adapt faster to new changes which will reduce the time and effort to give the desired result This technique using a new device can make the border molding procedure faster and simpler. It provides comfort to the dentist and the patient With less chair side time in border molding the dentist will be able to deliver the denture faster and concept of 1 day dentures will make the life of patient comfortable ,who currently need to visit dentist multiple times to get dentures

    Technology Inputs:

Imported Equipment/Spare Parts:
Equipment/Spare Parts Year ITC-HS Code
NA
Indigenous Equipment/Spare Parts:
Equipment/Spare Parts Year ITC-HS Code
NA
Imported Raw Materials:
Raw Materials Year ITC-HS Code
NA
Indigenous Raw Materials:
Raw Materials Year ITC-HS Code
NA
Existing R&D Facilities used:
Facilities Year ITC-HS Code
NA

   Patents & Publications:

Patents:
Filed Patents (No.) Granted Patents (No.) Year
2147483647 0 NA
Publications:
Submitted (No.) Published (No.) Year
0 0 NA

    Commercialization Potential:

Who are the Potential Licensees? Every year this market size is increasing with addition of approx. 30,000 new dentist (BDS & MDS) Newer Dental Labs are coming up and the existing ones are upgrading themselves. DENTAL COLLEGES 26,949 BDS Seats, 1000 MDS Prosthodontics Seats* (per year) 1,34,745 students in colleges (Across 5 years) Over 2.7 Lakh registered dentist in private practice Over 7000 registered dental labs Other segment is of Govt. PHC and Private Hospitals which have dental as one of the service offered.
What commercially available products address
the same problem?
Company Product Problem Addressed
Would you like to develop this invention further with
corporate research support?
Yes
Would you be interested in participating in cluster based
programs for commercialization research or business
planning for your invention?
Yes
      Submitted by: Date of Submission: 15-7-2022



Chat Room      Write Review     Talk to Experts


THE VISION
THE MISSION
ABOUT I-STEM
It has always been the basic tenet of the Government of India, in generously funding R&D efforts at academic institutions over the years, that facilities established through such support be made available to those needing them and qualified to make use of them for their own research work
read more >>

However, this was never easy or straightforward for, among other reasons, there was no ready source of information of what facility was available and where. Thanks to the Web, it is much easier today to have a national and regional “inventory of resources”, so as to match users with the resources they need, and to do all this in an efficient and transparent manner.

This can lead to a leap in R&D productivity and greatly enhance the effectiveness of public investment. This is the motivation behind I-STEM.
read less <<
Visitor Hit Counter
Hosted at Indian Institute of Science
Copyright © 2024 I-STEM. All rights reserved.
Audited by: STQC Bengaluru.