Equipment Info

Spark Plasma Sintering

Equipment Info

Equipment Code : 2340230

Make : M/s. FCT Systeme GmbH, Germany

Model : KCE-FCT HP D 10-SD

Institution : Indian Institute of Technology (IIT) Indore

Department : Discipline of Metallurgy Engineering and Materials Science (MEMS)

Funding Agency Details : DST, Govt. of India

Pooling of Equipment slot : Yes

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : This instrument can be used for a wide range of materials to convert powder into bulk system up to 2000oC). The material can be metals, ceramics, nanostructured material, amorphous material, and composites. Pressure up to 50MPa for graphite dies and 100MPa for WC die is also possible.

Usage Rate: (as indicated by the custodian/host institution)

S.No.	Users Category	Rate (unit hour) & (In Rupees)
1	Academic (External)*
2	Academic (Internal)***
3	Grassroot innovator
4	Industry User
5	National Research Lab User
6	Startup/MSME User

Accessories / Consumables / Spare parts / Testing modes

Sample Name	Sample Type	Sample UOM	Sample Availability	Unit Cost	Sample Quantity	Sample Description
No Data Available

The Indian Science, Technology, and Engineering facilities Map (I-STEM) is an interactive web portal designed to accelerate scientific progress in India. This initiative, conceived and supported by the Office of the Principal Scientific Adviser to the Government of India, creates a centralized platform for sharing publicly funded R&D equipment and facilities across various institutions throughout the country.

Resources

18004253281 (customer care)
support@istem.co.in

Indian Science Technology and Engineering facilities Map

Indian Science Technology and Engineering facilities Map

Spark Plasma Sintering

Equipment Info

Equipment Code : 2340230

Make : M/s. FCT Systeme GmbH, Germany

Model : KCE-FCT HP D 10-SD

Institution : Indian Institute of Technology (IIT) Indore

Department : Discipline of Metallurgy Engineering and Materials Science (MEMS)

Funding Agency Details : DST, Govt. of India

Pooling of Equipment slot : Yes

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : This instrument can be used for a wide range of materials to convert powder into bulk system up to 2000oC). The material can be metals, ceramics, nanostructured material, amorphous material, and composites. Pressure up to 50MPa for graphite dies and 100MPa for WC die is also possible.

Usage Rate: (as indicated by the custodian/host institution)

Accessories / Consumables / Spare parts / Testing modes

Resources

Indian Science Technology and Engineering facilities Map

Indian Science Technology and Engineering facilities Map

Spark Plasma Sintering

Equipment Info

Equipment Code : 2340230

Make : M/s. FCT Systeme GmbH, Germany

Model : KCE-FCT HP D 10-SD

Institution : Indian Institute of Technology (IIT) Indore

Department : Discipline of Metallurgy Engineering and Materials Science (MEMS)

Funding Agency Details : DST, Govt. of India

Pooling of Equipment slot : Yes

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : This instrument can be used for a wide range of materials to convert powder into bulk system up to 2000oC). The material can be metals, ceramics, nanostructured material, amorphous material, and composites. Pressure up to 50MPa for graphite dies and 100MPa for WC die is also possible.

Usage Rate: (as indicated by the custodian/host institution)

Accessories / Consumables / Spare parts / Testing modes

Acknowledgement Statement For Equipment users:

Acknowledgement Statement For Equipment users:

Resources