I-STEM Logo
Principal Sciencefic Logo

Equipment Info

Deformation Simulation Laboratory (Gleeble 3800 Thermomechanical Simulator + Dilatometer DIL 805 AD)

Equipment Info

Equipment Code : 2745788

Make : Dynamic Systems Inc. DSI, USA and TA Instruments Germany

Model : Gleeble 3800 system and DIL805A/D

Institution : Indian Institute of Technology (IIT) Bombay

Department : Centre for Sophisticated Instruments and Facilities

Funding Agency Details : Ministry of Steel

Pooling of Equipment slot :   No

AMC End Date (Valid Till) :  

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : 1. Dynamic Systems Inc. (DSI), Gleeble 3800 system, USASpecification/Features:Controlled deformation at different heating (10,0000C/s) and cooling (~6500C/s)Physical simulations for all fabrication and thermo-mechanical processing.Strain rate: 10^-3 to 100Atmosphere: Vacuum, Ambient air, Argon, Nitrogen Cooling conditions: Water Quenching, Forced Air Cooling, Coolinghttps://gleeble.com/products/gleeble-systems/gleeble-3800.html2. TA Instruments-DIL 805A/D, GermanySpecification/Features:Accurate (0.05 ?m & 0.05 0C) identification of all transformationsControlled simulations for investigation of microstructural evolutionStrain rate: 10^-3 to  10^-1Atmosphere: Vacuum, Ambient air, Argon, Nitrogen, Helium Cooling conditions:Gas cooling Coolinghttps://www.tainstruments.com/dil-805ad/  

Usage Rate: (as indicated by the custodian/host institution)


Samples External Academic User Internal Academic User Industry User Start-ups National Research Lab User Grassroot innovator
(Gleeble-3800) Flow Stress/Plane Strain Test with air cooling/normal cooling Temperature below 1200 Degree Celsius
(Gleeble-3800) Flow Stress / Plane Strain Test with water quenching Temperature below 1200 Degree Celsius
(Gleeble-3800) Tensile Test Temperature below 1200 Degree Celsius with air cooling/normal cooling
(DIL805A/D) Quenching using Ar/N2/He for 2 hours upto Temperature 1400 Degree Celsius
(DIL805A/D) Deformation Low Strength Alloy Temperature upto 1400 Degree Celsius
(DIL805A/D) Sub-Zero Test (in multiples of 6 hrs)
(DIL805A/D) Alpha-measurement (in multiples of 6 hrs)
(DIL805A/D) Deformation: High Strength alloy
(Gleeble-3800) Tensile Test with water quenching below 1200 Degree Celsius
(Gleeble-3800) Flow Stress/Plane Strain Test with air cooling/normal cooling Temperature above 1200 Degree Celsius
(Gleeble-3800) Flow Stress / Plane Strain Test with water quenching Temperature above 1200 Degree Celsius
(Gleeble-3800) Diffusion Bonding Upto 2 hrs

Accessories / Consumables / Spare parts / Testing modes

Sample Name Sample Type Sample UOM Sample Availability Unit Cost Sample Quantity Sample Description
No Data Available

The Indian Science, Technology, and Engineering facilities Map (I-STEM) is an interactive web portal designed to accelerate scientific progress in India. This initiative, conceived and supported by the Office of the Principal Scientific Adviser to the Government of India, creates a centralized platform for sharing publicly funded R&D equipment and facilities across various institutions throughout the country.

Resources

 

  • Visitor Hit Counter

 

Copyright © 2026 I-STEM. All rights reserved Hosted at the National Informatics Centre, Delhi, India Audited by: STQC Bengaluru as on 26 Sep 2024