Equipment Info

Differential Scanning Calorimetry

Equipment Info

Equipment Code : 3249777

Make : Perkin Elmer

Model : DSC 6000

Institution : International and Inter University Centre for Nanoscience and Nanotechnology (IIUCNN) Kottayam , Mah

Department : IIUCNN

Funding Agency Details : Government of Kerala

Pooling of Equipment slot : No

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : DSC Type: Single furnace Software: Pyris Measurement method: Heat Flux Temperature Range: -150 °C to 300 °C Gas Type: Nitrogen Gas Flow rates: 20 ml/min Heating (& cooling) rates: 0.1 and 100°C/min Auto sampler: 50 samples

Usage Rate: (as indicated by the custodian/host institution)

S.No.	Users Category	Rate (unit hour) & (In Rupees)
1	Academic (External)*
2	Academic (Internal)***
3	Grassroot innovator
4	Industry User
5	National Research Lab User
6	Startup/MSME User

Accessories / Consumables / Spare parts / Testing modes

Sample Name	Sample Type	Sample UOM	Sample Availability	Unit Cost	Sample Quantity	Sample Description
No Data Available

The Indian Science, Technology, and Engineering facilities Map (I-STEM) is an interactive web portal designed to accelerate scientific progress in India. This initiative, conceived and supported by the Office of the Principal Scientific Adviser to the Government of India, creates a centralized platform for sharing publicly funded R&D equipment and facilities across various institutions throughout the country.

Resources

18004253281 (customer care)
support@istem.co.in

Indian Science Technology and Engineering facilities Map

Indian Science Technology and Engineering facilities Map

Differential Scanning Calorimetry

Equipment Info

Equipment Code : 3249777

Make : Perkin Elmer

Model : DSC 6000

Institution : International and Inter University Centre for Nanoscience and Nanotechnology (IIUCNN) Kottayam , Mah

Department : IIUCNN

Funding Agency Details : Government of Kerala

Pooling of Equipment slot : No

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : DSC Type: Single furnace Software: Pyris Measurement method: Heat Flux Temperature Range: -150 °C to 300 °C Gas Type: Nitrogen Gas Flow rates: 20 ml/min Heating (& cooling) rates: 0.1 and 100°C/min Auto sampler: 50 samples

Usage Rate: (as indicated by the custodian/host institution)

Accessories / Consumables / Spare parts / Testing modes

Resources

Indian Science Technology and Engineering facilities Map

Indian Science Technology and Engineering facilities Map

Differential Scanning Calorimetry

Equipment Info

Equipment Code : 3249777

Make : Perkin Elmer

Model : DSC 6000

Institution : International and Inter University Centre for Nanoscience and Nanotechnology (IIUCNN) Kottayam , Mah

Department : IIUCNN

Funding Agency Details : Government of Kerala

Pooling of Equipment slot : No

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : DSC Type: Single furnace Software: Pyris Measurement method: Heat Flux Temperature Range: -150 °C to 300 °C Gas Type: Nitrogen Gas Flow rates: 20 ml/min Heating (& cooling) rates: 0.1 and 100°C/min Auto sampler: 50 samples

Usage Rate: (as indicated by the custodian/host institution)

Accessories / Consumables / Spare parts / Testing modes

Acknowledgement Statement For Equipment users:

Acknowledgement Statement For Equipment users:

Resources