Equipment Info

E Beam powder bed fusion additive manufacturing facility

Equipment Info

Equipment Code : 2354021

Make : GE, Additive Acram

Model : EBM A2X

Institution : CSIR Advanced Materials and Processes Research Institute (AMPRI) Bhopal

Department : Innovative Materials and Processes Division

Funding Agency Details : CSIR

Pooling of Equipment slot : No

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : Build Chamber 1.1 Maximum Build Size (W x D x H) : 200 x 200 x 380 mm or more 1.2 Maximum Beam Power : 3000W or more 1.3 Cathode Type : Tungsten filament or better 1.4 Minimum Beam Diameter: 250?m or lower 1.5 Maximum EB Translation Speed: 8000 m/s or more 1.6 Vacuum Technology: Pumping should be done by rotary pump followed by turbo pump 1.7 Vacuum Pressure: i. Column Pressure: 1x10-7 mbar or better ii. Chamber Pressure: 10-5 mbar or better iii. Build Atmosphere: 5 x 10-3 mbar or better 1.8 He Consumption during Build process: 1 liter/h or less 1.9 He Consumption during Build cool down: 75 liters/build cycle or lower 1.10 Maximum processing temperature: Bed Temperature 1100°C or above 1.11 Open software for process development for new materials is must 1.11 The system should be capable of processing all the standard materials listed. Process parameters, Process data and process theme for these standard materials should be provided Standard Build mater

Usage Rate: (as indicated by the custodian/host institution)

Samples	External Academic User	Internal Academic User	Industry User	Start-ups	National Research Lab User	Grassroot innovator
Additive Manufacturing

Accessories / Consumables / Spare parts / Testing modes

Sample Name	Sample Type	Sample UOM	Sample Availability	Unit Cost	Sample Quantity	Sample Description
No Data Available

The Indian Science, Technology, and Engineering facilities Map (I-STEM) is an interactive web portal designed to accelerate scientific progress in India. This initiative, conceived and supported by the Office of the Principal Scientific Adviser to the Government of India, creates a centralized platform for sharing publicly funded R&D equipment and facilities across various institutions throughout the country.

Resources

18004253281 (customer care)
support@istem.co.in

Indian Science Technology and Engineering facilities Map

Indian Science Technology and Engineering facilities Map

E Beam powder bed fusion additive manufacturing facility

Equipment Info

Equipment Code : 2354021

Make : GE, Additive Acram

Model : EBM A2X

Institution : CSIR Advanced Materials and Processes Research Institute (AMPRI) Bhopal

Department : Innovative Materials and Processes Division

Funding Agency Details : CSIR

Pooling of Equipment slot : No

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Usage Rate: (as indicated by the custodian/host institution)

Accessories / Consumables / Spare parts / Testing modes

Resources

Indian Science Technology and Engineering facilities Map

Indian Science Technology and Engineering facilities Map

E Beam powder bed fusion additive manufacturing facility

Equipment Info

Equipment Code : 2354021

Make : GE, Additive Acram

Model : EBM A2X

Institution : CSIR Advanced Materials and Processes Research Institute (AMPRI) Bhopal

Department : Innovative Materials and Processes Division

Funding Agency Details : CSIR

Pooling of Equipment slot : No

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Usage Rate: (as indicated by the custodian/host institution)

Accessories / Consumables / Spare parts / Testing modes

Acknowledgement Statement For Equipment users:

Acknowledgement Statement For Equipment users:

Resources