I-STEM Logo
Principal Sciencefic Logo

Equipment Info

Procurement of Thermogravimetric analysis TGA DTA system

Equipment Info

Equipment Code : 2354028

Make : Hitachi

Model : NEXTA STA 200

Institution : CSIR Advanced Materials and Processes Research Institute (AMPRI) Bhopal

Department : Functional Materials and Composites Division

Funding Agency Details : CSIR

Pooling of Equipment slot :   No

AMC End Date (Valid Till) :  

PRISM Service Category (About PRISM) : D

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) :

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) :

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : TGA (Thermogravimetric Analysis)/DTA (Differential Thermal Analysis) Equipment to measure the thermal property of the polymer composites samples and inorganic waste S. No. Parameters Value 1. Temperature Range Ambient to 1000 oC or better 2. Scanning/Heating Rates Minimum of 0.1 oC/min 3. The Cooling time/rate The Cooling time of the system from 1000 oC to 50 oC within 20 minutes or better 4. Gas flow controls Built in mass flow controller to control through software for gas flow setting. 5. Sample Weighing range/ TG analytical dynamic range ± 400 mg or better 6. Balance/TG Resolution 0.2 µg or better 7. Balance/TG Precision ? ± 0.05 % 8. DSC Calorimetric Precision/ Calorimetric Accuracy Enthalpy Accuracy ? ( ± 3% or 2.5 µW or better) 9. Temp accuracy ± 0.5 ?C or better 10. Gas Purging The system should have the facility to purge inert gases or active gases with automatic gas purging 11. Number of Samples position Minimum 5 numbers each Cera

Usage Rate: (as indicated by the custodian/host institution)


Samples External Academic User Internal Academic User Industry User Start-ups National Research Lab User Grassroot innovator
UP TO 600C
UP TO 1500C

Accessories / Consumables / Spare parts / Testing modes

Sample Name Sample Type Sample UOM Sample Availability Unit Cost Sample Quantity Sample Description
No Data Available

The Indian Science, Technology, and Engineering facilities Map (I-STEM) is an interactive web portal designed to accelerate scientific progress in India. This initiative, conceived and supported by the Office of the Principal Scientific Adviser to the Government of India, creates a centralized platform for sharing publicly funded R&D equipment and facilities across various institutions throughout the country.

Resources

 

  • Visitor Hit Counter

 

Copyright © 2026 I-STEM. All rights reserved Hosted at the National Informatics Centre, Delhi, India Audited by: STQC Bengaluru as on 26 Sep 2024