Equipment Info

3D Printer

Equipment Info

Equipment Code : 1961552

Make : Sigma

Model : BCN30Sigma

Institution : Haldia Institute of Technology (HIT) Haldia

Department : HIT AICTE IDEA LAB

Funding Agency Details : AICTE, Govt. of India

Pooling of Equipment slot : No

AMC End Date (Valid Till) :

1 / 1

❮ ❯

PRISM Service Category (About PRISM) : A

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) : Yes

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) : Yes

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : Technology: Fused Filament Fabrication (FFF), Extruder System: Independent Dual Extruder (IDEX), Build Volume: 210×297×210, Nozzle Diameter: (0.4 mm) (Standard), (0.3 mm/ 0.5 mm\0.8 mm), Print Speed: 40 to 60 mm/s recommended, Layer Resolution: 0.05 to 0.5 mm

Usage Rate: (as indicated by the custodian/host institution)

S.No.	Users Category	Rate (unit hour) & (In Rupees)
1	Academic (External)*
2	Academic (Internal)***
3	Grassroot innovator
4	Industry User
5	National Research Lab User
6	Startup/MSME User

Accessories / Consumables / Spare parts / Testing modes

Sample Name	Sample Type	Sample UOM	Sample Availability	Unit Cost	Sample Quantity	Sample Description
No Data Available

The Indian Science, Technology, and Engineering facilities Map (I-STEM) is an interactive web portal designed to accelerate scientific progress in India. This initiative, conceived and supported by the Office of the Principal Scientific Adviser to the Government of India, creates a centralized platform for sharing publicly funded R&D equipment and facilities across various institutions throughout the country.

Resources

18004253281 (customer care)
support@istem.co.in

Indian Science Technology and Engineering facilities Map

Indian Science Technology and Engineering facilities Map

3D Printer

Equipment Info

Equipment Code : 1961552

Make : Sigma

Model : BCN30Sigma

Institution : Haldia Institute of Technology (HIT) Haldia

Department : HIT AICTE IDEA LAB

Funding Agency Details : AICTE, Govt. of India

Pooling of Equipment slot : No

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : A

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) : Yes

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) : Yes

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : Technology: Fused Filament Fabrication (FFF), Extruder System: Independent Dual Extruder (IDEX), Build Volume: 210×297×210, Nozzle Diameter: (0.4 mm) (Standard), (0.3 mm/ 0.5 mm\0.8 mm), Print Speed: 40 to 60 mm/s recommended, Layer Resolution: 0.05 to 0.5 mm

Usage Rate: (as indicated by the custodian/host institution)

Accessories / Consumables / Spare parts / Testing modes

Resources

Indian Science Technology and Engineering facilities Map

Indian Science Technology and Engineering facilities Map

3D Printer

Equipment Info

Equipment Code : 1961552

Make : Sigma

Model : BCN30Sigma

Institution : Haldia Institute of Technology (HIT) Haldia

Department : HIT AICTE IDEA LAB

Funding Agency Details : AICTE, Govt. of India

Pooling of Equipment slot : No

AMC End Date (Valid Till) :

PRISM Service Category (About PRISM) : A

Pre-Experiment Support (including sample preparation, setup assistance and pre-experimental guidance) : Yes

Post-Experiment Support (including result interpretation, data analysis and post-experimental reporting) : Yes

Equipment Certification (if any) (No document available):

Equipment Calibration (if any) (No document available):

Remarks / Special Instructions (if any):

Description : Technology: Fused Filament Fabrication (FFF), Extruder System: Independent Dual Extruder (IDEX), Build Volume: 210×297×210, Nozzle Diameter: (0.4 mm) (Standard), (0.3 mm/ 0.5 mm\0.8 mm), Print Speed: 40 to 60 mm/s recommended, Layer Resolution: 0.05 to 0.5 mm

Usage Rate: (as indicated by the custodian/host institution)

Accessories / Consumables / Spare parts / Testing modes

Acknowledgement Statement For Equipment users:

Acknowledgement Statement For Equipment users:

Resources